|
|
MODEL CL-500
ELECTRIC CHARCOAL LIGHTER
MSRP $14.99
NO STARTER FLUID NEEDED
· FAST
· SAFE
· POLLUTION FREE
OPERATING INSTRUCTIONS
·
Spread a layer of charcoal or
briquettes on charcoal grate of grill or on a bed of sand or gravel.
·
Lay electric starter on top with
handle well outside the fire area.
·
Pile more charcoal in a pyramid on top
of the element.
·
Plug into a 100 or 120-volt outlet.
·
After approximately 8 minutes,
disconnect and remove electric starter from fire.
·
Spread coals evenly and form a bed of
coals.
IMPORTANT
The instructions above tell you to remove the electric starter from the
charcoal after 8 minutes. The reason for this is that your electric starter
will attain a temperature of 1000°F. This temperature will hasten the
deterioration of your starter and with sufficient wind; the charcoal will
melt the sheath of the element. If you leave you starter in the charcoal and
if it is still plugged in, there is danger of explosion as the sheath reaches
the melting point.
CAUTION:
To ensure continued protection against shock hazard, this heating element
should be connected to properly grounded outlets only. Operate on 100to 120
volts. When removing the starter from use, disconnect from outlet and rest on
positioning bracket to air cool.
UPC 0-11502-05000-4
Unit Dimensions: 2.0” X 3.1875” X 17.6875”
Hanging Color Box Dimensions: 3.125” X 3.0625” X 20.0”
Master Case 6 Units
Made in China
|
